Overview The Environmental Chamber is an accessory applicable to the Tensor Check tensile tester to carry out tests at controlled temperature.
• The Climatic Chamber can be supplied without refrigerating unit allowing to carry out tests between room temperature and +250°C.
• The refrigeration unit, which can also be installed after the purchase of the Climatic Chamber, extends its use to carry out tests between -40°C and +250°C.
Installation All Tensor_Check-Profile tensile testers are set up for the application of the climatic chamber that can be purchased and installed even after the purchase of the instrument
Test Cycles with Temperature set The TensorCheck software allows you to directly adjust the climatic chamber.
In this way it is possible to prepare test cycles that combine the temperature regulation and the execution of the mechanical stress of the specimen when the required conditions have been reached.
The climatic chamber control functions allow you to set:
• Set of temperatures
• Thermal gradient
• Thermal conditioning time within the set tolerance limits.
Tests at Low Temperature The instrument produced by Gibitre uses a Refrigeration Unit to reduce the temperature.
The use of the refrigeration unit, compared to cooling by liquid nitrogen, allows to:
• Check the test temperature perfectly, avoiding oscillations that may alter the results.
• Carry out long-term tests without risking to end the liquid nitrogen supply before finishing the test
• Eliminate the hazards related with manipulation of nitrogen
Extensometer for Environmental chamber The Climatic chamber can be equipped with an internal differential strain gauge for measuring the temperature-controlled differential elongation.
The strain gauge complies with the requirements of ISO 5893, has a resolution of 0.01mm and a total stroke of 400mm.
The strain gauge can be moved to the bottom of the chamber for testing that does not require it.
The digital linearization of the elongation reading guarantees extreme measurement accuracy over the entire stroke.
Displacement of the Environmental chamber The Environmental chamber is positioned on aluminum guides and can be easily moved back and forth to perform tests with or without temperature control.
Usable grips The Environmental chamber is positioned on aluminum guides and can be easily moved back and forth to perform tests with or without temperature control.
Temperatures (with Refrigerator)
Between -40°C and +250°C
Temperatures (standard chamber)
Between room temperature and +250°C
Internal Dimension
(W x D x H) 240 x 230 x 600 mm
Differential Extensometer
Mechanical extensometer with 0.01 mm resolution (conforming with ISO 5893 Standard - Class E)
The Environmental Chamber is an accessory applicable to the Tensor Check tensile tester to carry out tests at controlled temperature.
• The Climatic Chamber can be supplied without refrigerating unit allowing to carry out tests between room temperature and +250°C.
• The refrigeration unit, which can also be installed after the purchase of the Climatic Chamber, extends its use to carry out tests between -40°C and +250°C.
Installation
All Tensor_Check-Profile tensile testers are set up for the application of the climatic chamber that can be purchased and installed even after the purchase of the instrument
Test Cycles with Temperature set
The TensorCheck software allows you to directly adjust the climatic chamber.
In this way it is possible to prepare test cycles that combine the temperature regulation and the execution of the mechanical stress of the specimen when the required conditions have been reached.
The climatic chamber control functions allow you to set:
• Set of temperatures
• Thermal gradient
• Thermal conditioning time within the set tolerance limits.
Tests at Low Temperature
The instrument produced by Gibitre uses a Refrigeration Unit to reduce the temperature.
The use of the refrigeration unit, compared to cooling by liquid nitrogen, allows to:
• Check the test temperature perfectly, avoiding oscillations that may alter the results.
• Carry out long-term tests without risking to end the liquid nitrogen supply before finishing the test
• Eliminate the hazards related with manipulation of nitrogen
Extensometer for Environmental chamber
The Climatic chamber can be equipped with an internal differential strain gauge for measuring the temperature-controlled differential elongation.
The strain gauge complies with the requirements of ISO 5893, has a resolution of 0.01mm and a total stroke of 400mm.
The strain gauge can be moved to the bottom of the chamber for testing that does not require it.
The digital linearization of the elongation reading guarantees extreme measurement accuracy over the entire stroke.
Displacement of the Environmental chamber
The Environmental chamber is positioned on aluminum guides and can be easily moved back and forth to perform tests with or without temperature control.
The Environmental chamber is positioned on aluminum guides and can be easily moved back and forth to perform tests with or without temperature control.
Welcome to the Gibitre Instruments web site Please chose the preferred Cookie Management.
Benvenuti nel sito Gibitre Instruments Per continuare scegliete la Gestione dei Cookie che preferite.
Mandatory/Strettamente necessari
Technical cookies/Cookie tecnici
They are strictly necessary for the functioning of the website because they enable functions to facilitate user navigation, for example to access a personal profile without having to log in each time or to memorize the language in which they wish to browse the site without resetting it each time.
Sono strettamente necessari al funzionamento del sito web perché abilitano funzioni per facilitare la navigazione dell'utente, ad esempio per accedere al proprio profilo senza dover eseguire ogni volta il login oppure per memorizzare la lingua con cui desidera navigare sul sito senza reimpostarla ogni volta.
Accept/Accetto
Analytical cookies/Cookie analitici
They can be first or third party, they are installed to collect information on the use of the website. They are useful to statistically analyze accesses and visits to the site and to be able to improve its structure, navigation logics and contents.
Possono essere di prima o di terza parte, sono installati per collezionare informazioni sull'uso del sito web. Sono utili per analizzare statisticamente gli accessi e le visite al sito e per poterne migliorarne la struttura, le logiche di navigazione e i contenuti.
Accept/Accetto
Profilation cookies/Cookie di profilazione
Profiling cookies and social plugins, which can be first or third party, are used to track the user's navigation, analyze his behavior for marketing purposes and create profiles regarding his tastes, habits, choices, etc. In this way it is possible, for example, to transmit targeted advertising messages in relation to the interests of the user and in line with the preferences expressed by them while browsing online.
I cookie di profilazione e i social plugin, che possono essere di prima o di terza parte, servono a tracciare la navigazione dell'utente, analizzare il suo comportamento ai fini marketing e creare profili in merito ai suoi gusti, abitudini, scelte, etc. In questo modo è possibile ad esempio trasmettere messaggi pubblicitari mirati in relazione agli interessi dell'utente ed in linea con le preferenze da questi manifestate nella navigazione online.
Cookies policy For detailed informations about the use of cookies, please read our Cookies Management Practice.
Gestione dei Cookies Per maggiori informazioni sui cookie utilizzati consultate la nostra Procedura sull'Uso dei Cookies.